Tapered Light Post & Friction Fit Track Fastener for Scalextric slot car tracks.
Sold in packs of (10).
We designed our friction fit light post mount/track fastener so that it is suitable for most standard 1:72 and 1:50 scale, 3 volt, Nano LED light posts, available on Amazon and other places.
LED light poles are not included! See the other listing for complete lights on mounts
The 2mm (expandable to 3mm) hole down the center passes through to the bottom where we have designed a wire channel and guide to pass the wires underneath the track through the clip, which removes the potential of pinching the wires while fastening down. You will however need some intermediate soldering skills for wiring up the lights them self.
The light post hole can be drilled out to 3mm for larger light poles if needed and the fastener hole on the back of the clip was designed to expand for a slightly larger/longer screw, if you need one. Clips are 3D printed in dark grey to simulate tapered concrete pillars and they can be painted or wrapped with a sticker if you prefer.
Designed and tested on Scalextric Sport Track.
No giving up a light pole positions to a track fastener, our design addresses both!
CARRERA VERSION ALSO AVAILABLE.
Designed and manufactured in-house by Slot Car Mancave and not available from any resellers.