The Slot Car Mancave - Tire Stack Light Post Clip with 3v LED light pole.
Solid White, or new Red & White base, for Carrera Evolution and Digital 132/124 track.
Sold Individually
Each unit stands approximately 7.35 inches tall from the base of the clip to the top of the light fixture. We aimed for a selective compression ratio of 6:1 which is over 7 inches tall. This ratio is commonly used for 1:32 scale slot car tracks. Since most buildings and scenery is also 1:32 centric and so is our product.
We designed and manufacture our product so that it clips directly in to Carrera Evolution, and Digital 132/124 track. Each unit includes (1)one 3 volt, 20mah, bright white SMD LED light pole, and (1) one Slot Car Mancave Tire Stack Light Post Clip.
3D printed in two versions, white and red and solid white. The tire stack is modeled after a 1:32 scale slot car tire so that it is as close to scale as possible. Because some folks like to paint, wrap, or weather their layouts, we decided not to discontinue the solid white version. We wanted to keep your options open.
Back to the light base. The hole down the center passes through to the bottom where we have designed a wire channel and guide to pass the wires underneath the track through the clip, which removes the potential of pinching the wires while fastening down the clip to your surface. You will need some intermediate soldering skills for wiring up the lights as they will arrive pre-stripped and unterminated.
The lights also DO NOT come with a resistor, we were not supplied with any and haven't needed them by using the recommended light control product. The lights DO NOT wire directly to your track power. We do not recommend powering these LED's with track power, and neither does Carrera, it will damage the CU and void your warranty.
We recommend powering our lights in parallel with a 3V1A power supply and wire and shrink wrap are available in the Track Lighting Products Section. -This is the same power supply used for our other slot car street light products which means that the curb lights and street lights can both be wired to the same parallel rail together.
Tire and Slot Car are not included...🙂
Enjoy lighting up your track today!
Designed and manufactured in-house by Slot Car Mancave and not available from any resellers.
